Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Apple iPhone 13 / iPhone 13 mini - Activate / Set Up Device

2026-10-22 18:04:49.339

Apple iPhone 13 / iPhone 13 mini - Activate / Set Up Device

Here's how to quickly set up your iPhone 13 / iPhone 13 mini.
If you need to back up contacts and media, follow these instructions before activating your new Apple® iPhone® 13 / iPhone 13 Mini.
To avoid potential issues, review the following:
  • Swapping the SIM card from your previous device may prevent your device from being correctly provisioned for Verizon's 5G network.
  • If the device has been set up with an incorrect Apple ID erase all content and settings.
If troubleshooting, don't restore the device until all testing has been completed.
  1. Using your previous iPhone:
    If you don't have a previous iPhone, proceed to step 2.
  2. With the pre-installed 5G SIM card inserted, press and hold the
    Power button
     (top-right edge) to power the new iPhone on.
    iPhone 13 devices purchased from Apple do not have a pre-installed 5G SIM card and are recommended to be activated with an eSIM (electronic SIM card).
    5G Devices purchased from Verizon include a pre-installed 5G SIM card. Don't remove this SIM card as it may prevent your device from being correctly provisioned for Verizon's 5G network.
    If you're only activating the eSIM in your iPhone 13, remove the pre-installed 5G SIM card to access Verizon's 5G network.
    If this is an upgrade or your phone was not activated after purchase, refer to activate a new iPhone.
  3. From the 'Hello' screen, swipe up from the bottom of the screen to choose a language then tap your country or region.
    Hello Screen
  4. From the Appearance screen select the preferred size (e.g., Default, Medium, Large) then tap
    Continue
    :
    Appearance Screen
  5. From the 'Quick Start' screen, tap
    Set Up Without Another Device
    .
    If you have a previous device running iOS 11 or later, use Quick Start to complete auto sign-in.
    Quick Start Screen
  6. Tap the Wi-Fi network; enter the Wi-Fi password then tap
    Join
     (upper-right).
    If activating using eSIM, a Wi-FI network is required.
    If a Wi-Fi network is not available and activating using a phyiscal SIM card, tap
    Continue Without Wi-Fi
     to activate over the Verizon network.
    Allow a few moments for the activation process to complete.
  7. To proceed, review the Data & Privacy info then tap
    Continue
    .
  8. From the Set Up iPhone screen select one of the following:
    • Set Up for Myself
    • Set Up for a Child in My Family
  9. To set up Face ID, tap
    Continue
     then follow the on-screen instructions.
    To skip this step, tap Set Up Later.
  10. Enter a 6-digit passcode, then re-enter the passcode.
    To choose a different numeric code, tap
    Passcode Options
     then select from the following options:
    • Custom Alphanumeric Code
    • Customer Numeric Code
    • 4-Digit Numeric Code
  11. Tap a transfer apps & data option:
    Restoring from a backup can take up to 30 minutes to complete.
    Transfer Data Screen
  12. Enter your Apple ID and password then tap
    Continue
    .
    If you have an Apple ID already in use on another device, a verification code is sent to that device; you must enter this code to proceed with activation.
    If you don't have an Apple ID or have forgotten your sign-in info, refer to one of the following:
    Apple ID Screen
  13. To continue, review the Terms and Conditions then tap
    Agree
    .
  14. To set up your phone with the recommended settings, tap
    Continue
    .
    If you'd like to customize your settings, tap
    Customize
    .
    If Continue is selected, the remaining steps in the activation process will vary.
  15. From the 'Keep Your iPhone Up to Date' screen, tap
    Continue
     to get the latest features, security, and improvements automatically.
  16. From the 'Location Services' screen, review then tap
    Enable Location Services
     or
    Disable Location Services
     to continue.
  17. To set up Apple Pay, tap
    Continue
     then follow the on-screen instructions.
    To skip this step, tap
    Set Up Later in Wallet
    .
  18. To set up Siri, tap
    Continue
     then follow the on-screen instructions.
    To skip this step, tap
    Set Up Later in Settings
    .
  19. To receive weekly reports about your screen time and set limits for apps you want to manage, tap
    Continue
    .
    To skip this step, tap
    Set Up Later in Settings
    .
  20. To share iPhone Analytics with Apple, tap
    Share with Apple
    .
    If you don't want to share iPhone Analytics, tap
    Don't Share
    .
  21. To share app activity and crash data with app developers, tap
    Share with App Developers
    .
    If you don't want to share app activity and crash data with app developers, tap
    Don't Share
    .
  22. From the 'Appearance' screen, select a light or dark appearance for your iPhone then tap
    Continue
    .
    Selected when a checkmark is present.
  23. Select the desired Display Zoom then tap
    Continue
    .
    Selected when a checkmark is present.
  24. To begin using your iPhone, Swipe up to Get Started.
    Confirm the status bar at the top of the screen changes from 'No Service' to 'Verizon'. This process may take 2-3 minutes. If the activation fails, view Apple Support page.
  • Accounts (e.g., Gmail, Cloud, etc.) should be set up after activating the device (see Related Info section at the bottom of this page).
iPhone 13 models don't have a charging block or earbuds included in the box. If necessary, charging blocks / earbuds can be purchased from any Verizon store or online.