Session status messages
Session Status
Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below. Due to inactivity, your session has expired. Please sign in again to continue.

TCL TAB Pro 5G - Activate / Set Up Device

Here's how to quickly set up your TAB Pro 5G.

If you need to transfer contacts and media from one device to another, follow these step-by-step instructions before activating the new device.

To activate the device on prepaid service, refer to Set up Verizon Prepaid Service.

Ensure a 5G SIM card is inserted in the device prior to powering on.

To avoid potential activation / service issues, don't insert a 4G SIM card.

5G Devices purchased from Verizon include a pre-installed 5G SIM card.

If powered off, press and hold the

Power button

(top edge when held in portrait) until the TCL screen appears then release.

Select the appropriate language then tap

Start

To continue, review the Privacy policy and Terms of Service then tap

ACCEPT AND CONTINUE

(lower-right).

To review, tap each item then tap the

Back icon

to return to the Terms and Conditions screen.

From the Tablet Activation screen, tap

If prompted, enter the account PIN then follow the on-screen prompts (see Account PIN FAQs for additional info).

If activating a new tablet on an existing phone number, ensure the old device is powered off.

From the 'Set up Wi-Fi' screen, select a network, enter the password then tap

to continue.

If you choose not to add a network, you can add Wi-Fi networks after setup is complete.

From the 'Copy apps & data' screen, tap

then follow the on-screen options.

If you'd like a fresh start, tap

Don't copy

If troubleshooting, don't restore the device until all testing has been completed.

Tap

Skip

to add a Google account after the setup is complete.

If you choose not to add a Google account, skip to step 10.

To continue, review the Google Terms of Service, Google Play Terms of Service, and Google Privacy Policy then tap

I agree

From the Google Services screen, select any of the options to turn on Switch on

or off

then tap

If necessary, tap

to review additional services.

From the 'Unlock with fingerprint' screen, tap

then follow the on-screen instructions to add your fingerprint(s) and set up a screen lock method.

Tap

Skip

to add a screen lock or set up face or fingerprint recognition after setup is complete.

From the Google Assistant screen, tap

I Agree

to proceed with the voice setup process, or Skip the step.

If a Google account wasn't added in step 8, skip to step 14.

From the 'Anything else?' screen, select any of the additional options to configure or tap

No thanks

From the Verizon Services screen, tap the applicable switch(es) to turn the available options (Location info, Apps info) on or off then tap

From the 'Ready to go!' screen, tap

GOT IT!