Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Wi-Fi Extender (LVSKM1) - Set Up Device / Pair

2026-10-22 18:18:24.018

Wi-Fi Extender (LVSKM1) - Set Up Device / Pair

Here's how to set up the Wi-Fi Extender LVSKM1.
  1. Plug the Wi-Fi Extender into a power outlet next to the Verizon Internet Gateway and wait for a solid yellow light.
  2. Press and hold the 'Multi-purpose Pairing button' (pair button) on the Wi-Fi Extender LVSKM1 for 3 seconds, then the pair button on the Verizon Internet Gateway (within 2 minutes).
    Both devices blink blue while pairing.
    If there is an error during the pairing process, the Status LED flashes red for two minutes after the error occurs.
    Once a solid white light is observed on the Wi-Fi Extender LVSKM1, it’s paired.
    Press pair button
  3. Unplug the Wi-Fi extender from the power outlet, move it between the internet gateway and the weak Wi-Fi coverage area, then plug into a power outlet.
    If a blinking yellow and white light is observed, move the extender closer to the internet gateway.
  4. Once the LED indicator turns solid white, your setup is complete.
    For more info on LED indicators, see Wi-Fi Extender LVSKM1 - View LED Status Indicators this info.