Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Kyocera DuraSport 5G UW - Set Up Fingerprint Recognition

2026-10-22 19:08:30.374

Kyocera DuraSport 5G UW - Set Up Fingerprint Recognition

Here's how to set up fingerprint recognition on your DuraSport 5G UW.
  1. From a Home screen, swipe up to access the apps screen.
  2. Navigate:
    Settings Settings icon
    Security
    Fingerprint
    .
  3. Enter the current PIN, password or pattern.
  4. If no screen lock is active, tap
    Continue
    and select a lock option (e.g., Pattern, PIN or Password).
    Refer to Enable / Disable / Modify Screen Lock for assistance.
  5. Follow the on-screen tutorial to scan your fingerprint. Repeat as necessary until the process is complete.
    For greater accuracy, finger placement should vary slightly each time.
    For the fingerprint scanner to operate, hands must be clean and moisture-free.
  6. If needed, enter a Fingerprint name then tap
    Done
    (lower-right).