Kyocera DuraSport 5G UW - Enable / Disable / Modify Screen Lock
Here's how to set up, change or disable the screen lock option (e.g., password, pattern, etc.) for your DuraSport 5G UW.
- If using Microsoft® Exchange / Corporate sync, some screen lock options may be unavailable.
- These steps can also be utilized to change the current screen lock setting on your DuraSport 5G UW.
- From a Home screen, swipe up from the center of the display to access the apps screen.
- Navigate:Settings>Security>Screen lock.
- Do one of the following:
- Set up a screen lock:
- Pattern
- PIN
- Password
- Disable screen lock:
- Tap 'None' or 'Swipe'.
- To confirm, tapYES, REMOVE.
Pattern
An unlock pattern is created to access the device.
- TapPattern.
- Draw an unlock pattern (connecting at least 4 dots) then tapNEXT.
- Draw the same pattern again then tapCONFIRM.
- If prompted, tap one of the following then tapDONE:
- Show all notification content
- Show sensitive content only when unlocked
- Don't show notifications at all
PIN
A PIN is created to access the device.
- TapPIN.
- Enter a numeric PIN (4 to 16 digits) then tapNEXT.
- Re-enter the numeric PIN then tapCONFIRM.
- If prompted, tap one of the following then tapDONE:
- Show all notification content
- Show sensitive content only when unlocked
- Don't show notifications at all
Password
A password is created to access the device.
- TapPassword.
- Enter a password (4 to 16 characters) then tapNEXT.
- Re-enter the password then tapCONFIRM.
- If prompted, tap one of the following then tapDONE:
- Show all notification content
- Show sensitive content only when unlocked
- Don't show notifications at all