Samsung Galaxy S20+ 5G / Galaxy S20 Ultra 5G - Set Up Face Recognition
Here's how to set up a facial recognition scan to access your Galaxy S20+ 5G / Galaxy S20 Ultra 5G.
- Facial recognition is utilized to unlock the device.
- For optimal performance, ensure you are indoors or away from direct sunlight.
- If synced to a corporate exchange account, the availability of this option is dependent upon the policies of your IT admin.
- From a Home screen, swipe up or down from the center of the display to access the apps screen.These instructions only apply to Standard mode and the default Home screen layout.
- Navigate:.SettingsSecurity and privacy
- TapBiometrics.
- TapFace Recognition.If presented, enter the current PIN, password or pattern.
- Perform one of the following:
- For first time setup:
- From the Face recognition screen, review the info about Face recognition then tapContinue.
- If presented, select a lock screen option (e.g., Pattern, PIN or Password) then follow the steps to complete the process.If necessary, refer to Enable / Disable / Modify Screen Lock for assistance.
- While holding the phone 8-20 inches away, position your face within the square displayed on-screen.
- To continue, review the info about Backing up your Pattern, tapAgreethen follow the on-screen directions to sign in to your Samsung account.
- From the 'Face recognition' menu, tap the switch(es) to turn each option on
or off
.
- Face unlock: When on, device will unlock with a recognized face.
- Stay on Lock screen until swipe: Once unlocked, remain on the lock screen until you swipe.
- Require open eyes: Your face will only be recognized when your eyes are open.
- Brighten screen: Temporarily increases screen brightness to improve facial recognition in the dark.
- To remove face data:
- From the Face recognition menu, tapRemove face data.
- To confirm, review the disclaimer then tapRemove.
