Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Samsung Galaxy S20+ 5G / Galaxy S20 Ultra 5G - Add a Wi-Fi Network

2026-10-22 19:06:27.706

Samsung Galaxy S20+ 5G / Galaxy S20 Ultra 5G - Add a Wi-Fi Network

Here's how to connect your Galaxy S20+ 5G / Galaxy S20 Ultra 5G to a Wi-Fi network.

Connect to an Available Wi-Fi Network

  1. From a Home screen, swipe up from the center of the display to access the apps screen.
    These instructions only apply to Standard mode and the default Home screen layout.
  2. Navigate:
    Settings Settings icon
    Connections
    Wi-Fi
    .
  3. Ensure the Wi-Fi switch (upper-right) is turned on Switch on.
  4. From the 'Available networks' section, tap the preferred Wi-Fi network.
    If the preferred network isn't listed, it can be added manually.
  5. If presented, enter the appropriate password then tap
    Connect
    .
    To view the password as it is being entered, tap the
    Show password icon
     Show Password icon.

Manually Connect to a Wi-Fi Network

Wi-Fi network info is required to complete several steps. Refer to the network admin for assistance.
  1. From a Home screen, swipe up from the center of the display to access the apps screen.
    These instructions only apply to Standard mode and the default Home screen layout.
  2. Navigate:
    Settings Settings icon
    Connections
    Wi-Fi
    .
  3. Ensure the Wi-Fi switch (upper-right) is turned on Switch on.
  4. Tap
    Add network
     (at the bottom).
  5. From the 'Network name' field, enter the appropriate name.
  6. Tap
    Security
    .
  7. Tap the appropriate security option:
    If using an Open network (Enhanced Open), skip to step 9.
    • None
    • Enhanced Open
    • WEP
    • WPA/WPA2-Personal
    • WPA3-Personal
    • WPA/WPA2-Enterprise
    • WPA3-Enterprise
  8. From the Password field, enter the appropriate password.
    To view the password as it is being entered, tap the
    Show password icon
     Show password icon.
  9. Ensure additional settings (e.g., EAP method, CA certificate, etc.) are configured appropriately (if applicable) then tap
    Save
    .