Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Samsung Galaxy S10 - Add a Wi-Fi Network

2026-10-22 19:08:14.592

Samsung Galaxy S10 - Add a Wi-Fi Network

Here's how to connect your Galaxy S10e / Galaxy S10 / Galaxy S10+ to a Wi-Fi network.

Connect to an Available Wi-Fi Network

  1. From a Home screen, swipe up or down from the center of the display to access the apps screen.
    These instructions only apply to Standard mode and the default Home screen layout.
  2. Navigate:
    Settings Settings icon
    Connections
    Wi-Fi
    .
  3. Ensure the Wi-Fi switch (upper-right) is turned on Switch on icon.
  4. Tap the preferred network.
    If the preferred network isn't listed, it can be added manually.
  5. If presented, enter the appropriate password then tap
    Connect
    .
    To view the password as it is being entered, select (check)
    Show password icon
     Show password icon.

Manually Connect to a Wi-Fi Network

Wi-Fi network info is required to complete several steps. Refer to the network admin for assistance.
  1. From a Home screen, swipe up or down from the center of the display to access the apps screen.
    These instructions only apply to Standard mode and the default Home screen layout.
  2. Navigate:
    Settings Settings icon
    Connections
    Wi-Fi
    .
  3. Ensure the Wi-Fi switch (upper-right) is turned on Switch on icon.
  4. Tap
    Add network
     (bottom of list).
  5. From the Network name field, enter the appropriate name.
  6. Tap
    Security
    .
  7. Tap the appropriate security option:
    If using an Open network (None), skip to step 9.
    • Open
    • Enhanced Open
    • WEP
    • WPA/WPA2-Personal
    • WPA3-Personal
    • WPA/WPA2/-Enterprise
    • WPA3-Enterprise
  8. From the Password field, enter the appropriate password.
    To view the password as it is being entered, select (check)
    Show password icon
     Show password icon.
  9. Ensure additional settings (e.g., EAP method, CA certificate, etc.) are configured appropriately (if applicable) then tap
    Save
     (at the bottom).