Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Google Pixel Watch 2 - Replace Existing Device

2026-10-22 20:01:57.663

Google Pixel Watch 2 - Replace Existing Device

Here's how to activate your Pixel Watch 2 If you've recently replaced your watch or have reset the network settings.
  • The steps below only apply when a Google smartwatch has been replaced.
    If this Pixel Watch 2 is the first device to share this number and has never been active with Verizon service, refer to Activate / Set Up Device.
    If you're pairing an existing Pixel Watch 2 with a new Android™ smartphone, refer to Connect to New Phone.
  • The Pixel Watch 2 can be set up via Number Share.
    To set up with Number Share, the companion smartphone must be activated on the same Verizon account as the Pixel Watch 2.
  • Before completing the steps below, verify:
  1. Ensure your Pixel Watch 2 is charged and powered on.
    If necessary, tap the watch display to begin.
  2. On your smartphone, tap the
    Google Pixel Watch app
    .
  3. Tap
    System
    .
  4. Tap
    Reset and unpair watch
    .
  5. If desired select the 'Erase downloaded SIM' switch and tab
    Reset
    .
  6. Open the
    Google Pixel Watch app
     and follow on the on-screen prompts to completed activation.
    If necessary, refer to Activate / Set Up Device for assistance