Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

TCL TAB Disney Edition 2 - Add a Wi-Fi Network

2026-10-22 19:13:14.082

TCL TAB Disney Edition 2 - Add a Wi-Fi Network

Here's how to add a Wi-Fi network to your TCL TAB Disney Edition 2.

Connect to an Available Wi-Fi Network

  1. From a Home screen, swipe up to access the apps screen.
  2. Navigate:
    Settings Settings icon
    Wi-Fi
    .
  3. Ensure the Wi-Fi switch (upper-right) is turned on Switch on.
  4. From the Wi-Fi networks section, tap the preferred network.
    If the preferred network isn't listed, it can be added manually.
  5. If prompted, enter the appropriate password then tap
    CONNECT
    .
    To view the password as it is being entered, tap
    Show password
     (enabled when a checkmark is present).
    If necessary, tap
    Advanced options
     to ensure any additional settings (e.g., Proxy settings, IP settings, etc.) are configured appropriately.

Manually Connect to a Wi-Fi Network

Wi-Fi network info is required to complete several steps. Refer to the network admin for assistance.
  1. From a Home screen, swipe up to access the apps screen.
  2. Navigate:
    Settings Settings icon
    Wi-Fi
    .
  3. Ensure the Wi-Fi switch (upper-right) is turned on Switch on.
  4. Tap
    Add network
    .
    May require scrolling to the bottom of the screen.
  5. From the Network name (SSID) field, enter the appropriate name.
  6. Tap the 'Security field'
    dropdown menu
     Dropdown menu icon (right) then select one of the following security options:
    • None
    • Enhanced Open
    • WEP
    • WPA/WPA2-Personal
    • WPA3-Personal
    • WPA/WPA2-Enterprise
    • WPA3-Enterprise
  7. If necessary, tap
    Advanced options
     to enable any additional settings (e.g., Proxy settings, IP settings, etc).
  8. From the Password field, enter the appropriate password then tap
    CONNECT
    .
    To view the password as it is being entered, tap
    Show password
    .