Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Samsung Galaxy Z Flip5 - Add a Wi-Fi Network

2026-10-22 16:05:51.121

Samsung Galaxy Z Flip5 - Add a Wi-Fi Network

Here's how to connect your Galaxy Z Flip5 to a Wi-Fi network.

Connect to an Available Wi-Fi Network

  1. From a Home screen, swipe up from the center of the display to access the apps screen.
  2. Navigate:
    Settings Settings icon
    Connections
    .
  3. Tap
    Wi-Fi
    .
  4. Ensure the Wi-Fi switch (upper-right) is turned on Switch on.
  5. From the 'Available networks' section, tap the preferred Wi-Fi network.
    If the preferred network isn't listed, it can be added manually.
  6. If presented, enter the appropriate password then tap
    Connect
    .
    To view the password as it is being entered, tap the
    Show password icon
     Show Password icon.

Manually Connect to a Wi-Fi Network

  1. Tap
    Add network
     (at the bottom).
  2. From the 'Network name' field, enter the appropriate name.
  3. Tap
    Security
     then select the appropriate security option:
    If using an Open network (Enhanced Open), skip to step 5.
    • None
    • Enhanced Open
    • WEP
    • WPA/WPA2-Personal
    • WPA3-Personal
    • WPA/WPA2-Enterprise
    • WPA3-Enterprise
    • WPA3-Enterprise 192-bit
  4. From the Password field, enter the appropriate password.
    To view the password as it is being entered, tap the
    Show password icon
     Show password icon.
  5. Tap
    Hidden network
     to turn on Switch on or off Switch off.
  6. Tap
    View more
     to ensure additional settings (e.g., IP settings, Proxy, etc.) are configured appropriately (if applicable) then tap
    Save
    .