TCL TAB 8 Plus - Add a Wi-Fi Network
Here's how to connect your TAB 8 Plus to a Wi-Fi network.
Connect to an Available Wi-Fi Network
- From a Home screen, swipe up to access the apps screen.
- Navigate: .
- Ensure the Wi-Fi switch (upper-right) is turned on
.
- From the Wi-Fi networks section, tap the preferred network.If the preferred network isn't listed, it can be added manually.
- If prompted, enter the appropriate password then tapConnect.To view the password as it is being entered, tapShow password(enabled when a checkmark is present).If necessary, tapAdvanced optionsto ensure any additional settings (e.g., Proxy settings, IP settings, etc.) are configured appropriately.
Manually Connect to a Wi-Fi Network
Wi-Fi network info is required to complete several steps. Refer to the network admin for assistance.
- From a Home screen, swipe up to access the apps screen.
- Navigate: .
- Ensure the Wi-Fi switch (upper-right) is turned on
.
- TapAdd network.May require scrolling to the bottom of the screen.
- From the Network name (SSID) field, enter the appropriate name.
- Tap the 'Security field'dropdown menu
(right) then select one of the following security options:
- None
- Enhanced Open
- WEP
- WPA/WPA2-Personal
- WPA3-Personal
- WPA/WPA2-Enterprise
- WPA3-Enterprise
- If necessary, tapAdvanced optionsto enable any additional settings (e.g., Proxy settings, IP settings, etc).
- From the Password field, enter the appropriate password then tapSave.To view the password as it is being entered, tapShow password.