Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Manage Mobile / Wi-Fi Hotspot Settings - KYOCERA DuraXV Extreme+

2026-10-22 18:09:14.755

Manage Mobile / Wi-Fi Hotspot Settings - KYOCERA DuraXV Extreme+

Here's how to configure Mobile Hotspot settings (e.g., password, hotspot name, etc.) on your DuraXV Extreme+.
  1. From the main screen, select
    Menu
    .
    Utilize the 5-way navigation pad to highlight and the center button to select.
    5-way Navigation Pad
  2. Navigate:
    Settings & tools
    Settings
    Wireless & Networks
    .
  3. Select
    Tethering and Mobile Hotspot
    .
  4. Select
    Mobile Hotspot
    .
  5. Select
    Mobile Hotspot
     again.
  6. Highlight On then select
    Set
     to turn on the mobile hotspot.
  7. If prompted, read the info about the mobile hotspot then select
    OK
    .
  8. If prompted, read the info about the mobile hotspot using data service then press the
    left soft key
     Left soft key to choose Yes.
  9. From the Setup Mobile Hotspot screen, configure the following as needed:
    • Hotspot nameEnte a hotspot name.
      To hide your connection from other devices, navigate to Hide my device then press
      left soft key
       to choose Check.
    • Security
      1. Highlight the Security field then press the
        left soft key
         to choose Set.
      2. Highlight an option then select
        Set
         :
        • WPA2 PSK
        • None
    • Password
      1. If preferred, highlight
        Show password
         then press the
        left soft key
         to choose Check.
        Show password is selected when a check mark is present.
      2. Select the
        Password Field
         then enter the new password.
        Password must be at least 8 characters.
        The new password must be entered on the connecting device.
  10. Select
    Save
     then press the
    left soft key
     to choose Continue.