Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

TCL 30 V 5G - Set Up Fingerprint Recognition

2026-10-22 20:12:48.682

TCL 30 V 5G - Set Up Fingerprint Recognition

Here's how to set up fingerprint recognition on your TCL 30 V 5G.
  • A fingerprint is utilized to unlock the device.
  • For the fingerprint scanner to operate, hands must be clean and free of moisture, dirt, oil, lotion, dyes, etc.
  • Up to 3 fingerprints can be registered on the device.
  1. From a Home screen, swipe up to access the apps screen.
  2. Navigate:
    Settings Settings icon
    Security
    .
  3. From the Device security section, tap
    Screen lock
    .
  4. Enter the current PIN, password or pattern.
    If no screen lock is active, tap
    Continue
     and select a lock option (e.g., Pattern, PIN or Password) then follow the steps to complete the process.
    Refer to Enable / Disable / Modify Screen Lock for assistance.
  5. Tap the
    Fingerprint switch
     to turn on Switch on or off Switch off.
  6. Follow the on-screen tutorial to scan your fingerprint. Repeat as necessary until the process is complete.
  7. Tap
    Done
     (lower-right).