Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

MOTOROLA EDGE 5G UW - Add a Wi-Fi Network

2026-10-22 21:07:49.398

MOTOROLA EDGE 5G UW - Add a Wi-Fi Network

Here's how to connect your motorola edge 5G UW to a Wi-Fi network.

Connect to an Available Wi-Fi Network

  1. From a Home screen, swipe up from the middle to display all apps.
  2. Navigate:
    Settings Settings icon
    Network & internet
    Internet
    .
  3. Ensure the Wi-Fi switch (upper-right) is turned on Wi-Fi switch on.
  4. From the Wi-Fi networks section, tap the preferred network.
    If the preferred network isn't listed, it can be added manually.
  5. If prompted, enter the appropriate password then tap
    Connect
    .
    To view the password as it is being entered, tap (check)
    Show password
    .

Manually Connect to a Wi-Fi Network

Wi-Fi network info is required to complete several steps. Refer to the network admin for assistance.
  1. From a Home screen, swipe up from the middle to display all apps.
  2. Navigate:
    Settings Settings icon
    Network & internet
    Internet
    .
  3. Ensure the Wi-Fi switch (upper-right) is turned on Wi-Fi switch on.
  4. Tap
    Add network
    .
  5. From the Network name (SSID) field, enter the appropriate network name.
  6. From the Security field, tap the
    Dropdown menu
     dropdown menu icon.
  7. Tap the applicable security option:
    If using an Open network (None), skip to step 10.
    • None
    • Enhanced Open
    • WEP
    • WPA / WPA2 - Personal
    • WPA3 - Personal
    • WPA / WPA2 / WPA3 - Enterprise
    • WPA3 - Enterprise 192-bit
  8. If prompted, enter a User name in the Identity field.
  9. Enter the password into the Password field.
    To view the password as it is being entered, tap (check)
    Show password
    .
  10. Tap
    Advanced options
    , ensure all additional settings (e.g., Proxy, IP Settings, etc.) are configured appropriately (if applicable) then tap
    Save
    .