Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

MOTO G PURE - Set Up Fingerprint Recognition

2026-10-22 19:13:10.567

MOTO G PURE - Set Up Fingerprint Recognition

Here's how to set up fingerprint recognition on your moto g pure.
  • A fingerprint is utilized to unlock the device.
  • For the fingerprint scanner to operate, hands must be clean and free of moisture, dirt, oil, lotion, dyes, etc.
  • Up to 5 fingerprints can be registered on the device.
  1. From a Home screen, swipe up to access all apps.
  2. Navigate:
    Settings Settings icon
    Security
    .
  3. From the Device Security section, tap
    Fingerprint
    .
    If presented, enter the current PIN, password or pattern.
  4. If presented with a backup screen lock method, tap the desired option (e.g., Fingerprint + Pattern, Fingerprint + PIN, etc).
    Refer to Enable / Disable / Modify Screen Lock for assistance.
  5. From the 'Unlock with your fingerprint' screen, tap
    Setup
     (lower-right).
  6. Place your finger on the sensor (back of the phone) until it vibrates then lift.
    Repeat this step as necessary until the process is complete.
    For greater accuracy, finger placement should vary slightly each time.
  7. Tap 'Done' or 'Add another'.