Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Orbic Myra 5G - Add a Wi-Fi Network

2026-10-22 18:06:30.888

Orbic Myra 5G - Add a Wi-Fi Network

Here's how to connect your Orbic Myra 5G to a Wi-Fi network.

Connect to an Available Wi-Fi Network

  1. From a Home screen, swipe up to display all apps.
  2. Navigate:
    Settings Settings icon
    Network & internet
    Wi-Fi
    .
  3. Ensure the Use Wi-Fi switch (upper-right) is turned on On icon.
  4. From the Wi-Fi networks section, tap the preferred network.
    If the preferred network isn't listed on your Orbic® Myra 5G™ it can be added manually.
  5. If prompted, enter the appropriate password then tap
    CONNECT
    .
    To view the password as it is being entered, tap (check)
    Show password
    .
    If necessary, tap
    Advanced options
     to ensure any additional settings (e.g., Proxy settings, IP settings, etc.) are configured appropriately.

Manually Connect to a Wi-Fi Network

Wi-Fi network info is required to complete several steps. Refer to your internet service provider or the network admin for assistance.
  1. From a Home screen, swipe up to display all apps.
  2. Navigate:
    Settings Settings icon
    Network & internet
    Wi-Fi
    .
  3. Ensure the Use Wi-Fi switch (upper-right) is turned on On icon.
  4. Tap
    Add network
    .
    May require scrolling to the bottom of the screen.
  5. From the Network name (SSID) field, enter the appropriate name.
  6. Tap the 'Security field'
    dropdown menu
     (right) then select one of the following security options:
    • None
    • WEP
    • WPA/WPA2-Personal
    • WPA/WPA2/Enterprise
  7. From the Password field, enter the appropriate password then tap
    SAVE
    .
    To view the password as it is being entered, tap (check)
    Show password
    .
  8. If necessary, tap
    Advanced options
     to enable any additional settings (e.g., Proxy settings, IP settings, etc).