MOTO G POWER (2021) - Set Up Face Recognition
Here's how to set up a facial recognition scan to access your moto g power (2021).
- Facial recognition through Trusted Face:
- is an option for keeping the device screen from locking when looking at it.
- can be used to unlock the device when it is locked and powered on.
- is less secure than a PIN, pattern or password.
- A screen lock must be active (e.g., PIN, pattern, etc.) to use Trusted Face. If necessary, refer to Enable / Disable / Modify Screen Lock for assistance.
- If synced to a corporate exchange account, the availability of this option is dependent upon the policies of your IT admin.
- From a Home screen, swipe up to access all apps.
- Navigate: .
- TapFace unlock.
- Enter the current unlock method (e.g., PIN, pattern, etc.).
- Perform any of the following:
- For first time set up:
- TapSET UP(lower-right) then tapNEXT.If prompted to Allow 'Motorola face unlock', tapAllow.
- Align your face within the circle and follow onscreen prompts until the process is complete
- From the 'Almost there' screen, tap the options to turn on
or off
:
- Skip lock screen
- Lift to unlock
- To continue, tapNEXT, then tapDone.
- To improve / replace a face match:
- TapRedo face scan.
- Review the message then tapRedo.If prompted, re-enter your current unlock method.
- Align your face within the circle and follow onscreen prompts until the process is complete
- From the 'Almost there' screen, tap the options to turn on or off:
- Skip lock screen
- Lift to unlock
- To continue, tapNEXT, then tapDone.
- To remove face data:
- TapDelete face data.
- To confirm, review the disclaimer then tapOK.