Session status messages
Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

moto g power - Power Up in Safe Mode

2026-10-22 16:05:38.211

moto g power - Power Up in Safe Mode

Here's how to boot your moto g power into Safe Mode to help determine if an app is causing it to freeze, reset or run slowly.
Safe Mode puts your phone in a diagnostic state (returned to default settings) so you can determine if a third-party app is causing your device to freeze, reset or run slow.
An alternate method is available if the device can be powered on and is responsive.
  1. With the device powered off, press and hold the
    Power button
    (right edge) until the moto logo appears then release.
    Power and volume button
  2. Approximately 2-3 seconds after the moto logo appears on-screen, press and hold the
    Volume down button
    .
    If pressed too soon, device won't boot into safe mode.
  3. Continue to hold the
    Volume down button
    until 'Safe mode' appears in the lower-left of the unlock or Home screen then release.
    This may take up to 45 seconds.
    Safe mode screen
  4. With Safe Mode enabled, ensure Airplane Mode is turned off then test device and app functionality.