Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Samsung Galaxy A02s - Add a Wi-Fi Network

2026-10-22 19:06:02.108

Samsung Galaxy A02s - Add a Wi-Fi Network

Here's how to connect your Galaxy A02s to a Wi-Fi network.

Connect to an Available Wi-Fi Network

  1. From a Home screen, swipe up from the center of the display to access the apps screen.
  2. Navigate:
    Settings Settings icon
    Connections
    .
  3. Tap
    Wi-Fi
    .
  4. Ensure the Wi-Fi switch (upper-right) is turned on Switch on.
  5. From the 'Available networks' section, tap the preferred Wi-Fi network.
    If the preferred network isn't listed, it can be added manually.
  6. If presented, enter the appropriate password then tap
    Connect
    .
    To view the password as it is being entered, tap the
    Show password icon
     Show Password icon.
    If necessary, tap
    View more
     to ensure additional settings (e.g., EAP method, CA certificate, etc.) are configured appropriately.

Manually Connect to a Wi-Fi Network

Wi-Fi network info is required to complete several steps. Refer to the network admin for assistance.
  1. From a Home screen, swipe up from the center of the display to access the apps screen.
  2. Navigate:
    Settings Settings icon
    Connections
    .
  3. Tap
    Wi-Fi
    .
  4. Ensure the Wi-Fi switch (upper-right) is turned on Switch on.
  5. Tap
    Add network
     (at the bottom).
  6. From the 'Network name' field, enter the appropriate name.
  7. From the 'Security' field, tap the
    Dropdown menu
     .
  8. Tap the appropriate security option:
    If using an Open network (Enhanced Open), skip to step 10.
    • Enhanced Open
    • WEP
    • WPA/WPA2-Personal
    • WPA3-Personal
    • WPA/WPA2-Enterprise
    • WPA3-Enterprise
  9. From the Password field, enter the appropriate password.
    To view the password as it is being entered, tap the
    Show password icon
     Show password icon.
  10. Tap
    View more
     to ensure additional settings (e.g., EAP method, CA certificate, etc.) are configured appropriately (if applicable) then tap
    Save
    .