Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Samsung Galaxy Tab S7+ 5G - Add a Wi-Fi Network

2026-10-22 19:08:16.292

Samsung Galaxy Tab S7+ 5G - Add a Wi-Fi Network

Here's how to connect your Galaxy Tab S7+ 5G to a Wi-Fi network.

Connect to an Available Wi-Fi Network

  1. From a Home screen, swipe up from the center of the display to access the apps screen.
  2. Navigate:
    Settings Settings icon
    Connections
    Wi-Fi
    .
  3. Ensure the Wi-Fi switch (upper-right) is turned on Switch on.
  4. Tap the preferred network.
    If the preferred network isn't listed, it can be added manually.
  5. If presented, enter the appropriate password then tap
    Connect
    .
    To view the password as it's being entered, tap the
    Show password icon
     Show password icon.

Manually Connect to a Wi-Fi Network

  1. From a Home screen, swipe up from the center of the display to access the apps screen.
  2. Navigate:
    Settings Settings icon
    Connections
    Wi-Fi
    .
  3. Ensure the Wi-Fi switch (upper-right) is turned on Switch on.
  4. Tap
    Add network
    .
  5. From the 'Network name' field, enter the appropriate name.
  6. From the 'Security' field, tap the
    Dropdown menu icon
     .
  7. Tap the appropriate security option:
    If using an 'Open network' (None), skip to step 9.
    If applicable, ensure additional settings (e.g., EAP method, CA certificate, etc.) are configured appropriately.
    • None
    • Enhanced Open
    • WEP
    • WPA/WPA2-Personal
    • WPA3-Personal
    • WPA/WPA2-Enterprise
    • WPA3-Enterprise
    • WPA3-Enterprise 192-bit
  8. From the 'Password' field, enter the appropriate password.
    To view the password as it's being entered, tap the
    Show password icon
     Show password icon.
  9. Tap
    Advanced
     then ensure additional settings (e.g., Anonymous identity, IP settings, Proxy, etc.) are configured appropriately (if applicable).
  10. Tap
    Save
    .