Session status messages
Session Status
Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below. Due to inactivity, your session has expired. Please sign in again to continue.

Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Kyocera DuraForce Ultra 5G UW - View / Extend Battery Life

Here's how to extend battery life, view charging status / remaining battery and determine which apps use the most power on your DuraForce Ultra 5G UW.

Battery life for your DuraForce Ultra 5G UW is measured by standby time and talk time.

Standby time is the amount of time the device stays powered on with no voice, data or other usage.

Talk time is based on voice usage.

Data usage such as web browsing, using apps or streaming reduces overall talk time.

Apps and processes are listed from highest to lowest percentage of power consumption. Review any high or unusual battery drain.

From a Home screen, navigate:

Settings

Battery

Review the current battery status.

The percentage indicates the remaining battery life, charging status and estimated time to fully charge.

Tap the

Menu icon

(upper-right) then tap

Battery usage

The 'Battery history' graph displays the time since it was last charged to 100%.

To improve battery life, you can:

Disable or uninstall apps (e.g., live wallpapers, etc.) that are consuming too much battery or RAM or aren't being used.

Contact the app developer if an app appears to cause excessive battery drain.

Ensure Power Saver Settings are enabled.

Adjust brightness settings to the lowest setting or use Adaptive brightness.

Turn off GPS when not in use.

If not set appropriately, certain apps or services may not function properly.

Turn off vibrate mode if not used.

Remove widgets that automatically update.