Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Kyocera DuraForce Ultra 5G UW - Enable / Disable / Modify Screen Lock

2026-10-22 19:08:31.439

Kyocera DuraForce Ultra 5G UW - Enable / Disable / Modify Screen Lock

Here's how to set up, change or disable the screen lock option (e.g., password, pattern, etc.) for your DuraForce Ultra 5G UW.
  • If using Microsoft® Exchange / Corporate sync, some screen lock options may be unavailable.
  • These steps can also be utilized to change the current screen lock setting on your Kyocera DuraForce Ultra 5G UW.

Pattern

An unlock pattern is created to access the device.
  1. From a Home screen, swipe up from the center of the display to access the apps screen.
  2. Navigate:
    Settings Settings icon
    Security
    Screen lock
    .
  3. Tap
    Pattern
    .
  4. Draw an unlock pattern (connecting at least 4 dots) then tap
    NEXT
    .
  5. Draw the same pattern again then tap
    CONFIRM
    .
  6. If prompted, tap one of the following then tap
    DONE
     :
    • Show all notification content
    • Show sensitive content only when unlocked
    • Don't show notifications at all
  7. To disable screen lock:
    1. Tap 'None' or 'Swipe'.
    2. To confirm, tap
      YES, REMOVE
      .

PIN

A PIN is created to access the device.
  1. From a Home screen, swipe up from the center of the display to access the apps screen.
  2. Navigate:
    Settings Settings icon
    Security
    Screen lock
    .
  3. Tap
    PIN
    .
  4. Enter a numeric PIN (4 to 16 digits) then tap
    NEXT
    .
  5. Re-enter the numeric PIN then tap
    CONFIRM
    .
  6. If prompted, tap one of the following then tap
    DONE
     :
    • Show all notification content
    • Show sensitive content only when unlocked
    • Don't show notifications at all
  7. To disable screen lock:
    1. Tap 'None' or 'Swipe'.
    2. To confirm, tap
      YES, REMOVE
      .

Password

A password is created to access the device.
  1. From a Home screen, swipe up from the center of the display to access the apps screen.
  2. Navigate:
    Settings Settings icon
    Security
    Screen lock
    .
  3. Tap
    Password
    .
  4. Enter a password (4 to 16 characters) then tap
    NEXT
    .
  5. Re-enter the password then tap
    CONFIRM
    .
  6. If prompted, tap one of the following then tap
    DONE
     :
    • Show all notification content
    • Show sensitive content only when unlocked
    • Don't show notifications at all
  7. To disable screen lock:
    1. Tap 'None' or 'Swipe'.
    2. To confirm, tap
      YES, REMOVE
      .