Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

TCL SIGNA - Add a Wi-Fi Network

2026-10-22 18:10:40.557

TCL SIGNA - Add a Wi-Fi Network

Here's how to connect your SIGNA to a Wi-Fi network.

Connect to an Available Wi-Fi Network

  1. From a Home screen, swipe up to access all apps.
  2. Navigate:
    Settings Settings icon
    Network & internet
    Wi-Fi
    .
  3. Ensure the
    Use Wi-Fi switch
     is on Switch on.
  4. Tap the preferred network.
    If the preferred network isn't listed, it can be added manually.
  5. If presented, enter the appropriate password then tap
    Connect
    .
    To view the password as it is being entered, select (check)
    Show password
    .

Manually Connect to a Wi-Fi Network

Wi-Fi network info is required to complete several steps. Refer to the network admin for assistance.
  1. From a Home screen, swipe up to access all apps.
  2. Navigate:
    Settings Settings icon
    Network & internet
    Wi-Fi
    .
  3. Ensure the Wi-Fi switch is on Switch on.
  4. Tap
    Add network
     (at the bottom of list).
  5. From the Network name field, enter the appropriate name.
  6. From the Security field,tap the
    Dropdown menu icon
     .
  7. Tap the appropriate security option:
    If using an open network (None), skip to step 9.
    • None
    • Enhanced Open
    • WEP
    • WPA / WPA2-Personal
    • WPA3-Personal
    • WPA / WPA2 / WPA3-Enterprise
  8. From the 'Password' field, enter the appropriate password.
    To view the password as it is being entered, select (check)
    Show password
    .
  9. Ensure additional settings (e.g., EAP method, CA certificate, etc.) are configured appropriately (if applicable) then tap
    Save (lower-right)
    .