Samsung Galaxy S20 FE 5G UW - Add a Wi-Fi Network
Here's how to connect your Galaxy S20 FE 5G UW to a Wi-Fi network.
Connect to an Available Wi-Fi Network
- From a Home screen, swipe up to access the apps screen.These instructions only apply to Standard mode and the default Home screen layout.
- Navigate:.SettingsConnectionsWi-Fi
- Ensure the Wi-Fi switch (upper-right) is turned on
.
- From the 'Available networks' section, tap the preferred Wi-Fi network.If the preferred network isn't listed, it can be added manually.
- If presented, enter the appropriate password then tapConnect.To view the password as it is being entered, tap theShow password icon
.
Manually Connect to a Wi-Fi Network
Wi-Fi network info is required to complete several steps. Refer to your internet service provider or the network admin for assistance.
- From a Home screen, swipe up to access the apps screen.These instructions only apply to Standard mode and the default Home screen layout.
- Navigate:.SettingsConnectionsWi-Fi
- Ensure the Wi-Fi switch (upper-right) is turned on
- TapAdd network
.
- From the Wi-Fi name (SSID) field, enter the appropriate name.
- Tap the 'Security field'dropdown menu
(on the right) then select one of the following security options:
- Enhanced Open
- WEP
- WPA/WPA2-Personal
- WPA3-Personal
- WPA/WPA2/-Enterprise
- WPA3-Enterprise
- If necessary, tapAdvancedto enable any additional settings (e.g., Proxy settings, IP settings, etc).
- From the Password field, enter the appropriate password then tapSave.To view the password as it is being entered, tap theShow password icon