Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Samsung Galaxy A51 5G UW - Add a Wi-Fi Network

2026-10-22 21:02:00.748

Samsung Galaxy A51 5G UW - Add a Wi-Fi Network

Here's how to connect your Galaxy A51 5G UW to a Wi-Fi network.

Connect to an Available Wi-Fi Network

  1. From a Home screen, swipe up to access the apps screen.
    These instructions only apply to Standard mode and the default Home screen layout.
  2. Navigate:
    Settings Settings icon
    Connections
    Wi-Fi
    .
  3. Ensure the Wi-Fi switch (upper-right) is turned on Switch on icon.
  4. From the 'Available networks' section, tap the preferred Wi-Fi network.
    If the preferred network isn't listed, it can be added manually.
  5. If presented, enter the appropriate password then tap
    Connect
    .
    To view the password as it is being entered, tap the
    Show password icon
     Show Password icon.

Manually Connect to a Wi-Fi Network

Wi-Fi network info is required to complete several steps. Refer to your internet service provider or the network admin for assistance.
  1. From a Home screen, swipe up to access the apps screen.
    These instructions only apply to Standard mode and the default Home screen layout.
  2. Navigate:
    Settings Settings icon
    Connections
    Wi-Fi
    .
  3. Ensure the Wi-Fi switch (upper-right) is turned on Switch on icon.
  4. Tap
    Add network
     .
  5. From the Network name field, enter the appropriate name.
  6. Tap
    Security
     then select one of the following security options:
    • None
    • Enhanced Open
    • WEP
    • WPA/WPA2-Personal
    • WPA3-Personal
    • WPA/WPA2-Enterprise
    • WPA3-Enterprise
    • WPA3-Enterprise 192-bit
  7. From the Password field, enter the appropriate password.
    To view the password as it is being entered, tap the
    Show password icon
     Show Password icon.
  8. If necessary, tap
    View more
     to enable any additional settings (e.g., Proxy settings, IP settings, etc).
  9. Tap
    Save
    .