Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

motorola razr - Set Up Fingerprint Recognition

2026-10-22 18:06:35.791

motorola razr - Set Up Fingerprint Recognition

Here's how to set up fingerprint recognition on your razr.
  • A fingerprint is utilized to unlock the device.
  • For the fingerprint scanner to operate, hands must be clean and free of moisture, dirt, oil, lotion, dyes, etc.
  • Up to 5 fingerprints can be registered on the device.
  1. From a Home screen, swipe up to access all apps.
  2. Navigate:
    Settings Settings icon
    Security
    .
  3. From the DEVICE SECURITY section, tap
    Fingerprint
    .
    If presented, enter the current PIN, password, or pattern.
  4. If presented with a lock screen notification, tap
    Set up
    .
    Refer to Set Up Screen Lock for assistance.
  5. Tap the
    fingerprint sensor
     and follow the on-screen instructions.
  6. Place your finger on the sensor until it vibrates then lift.
    Repeat this step as necessary until the process is complete.
    For greater accuracy, finger placement should vary slightly each time.
  7. Tap 'Done' or 'Add another'.