Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Home Phone Base - Insert / Remove SIM

2026-10-22 16:07:13.491

Home Phone Base - Insert / Remove SIM

Here's how to properly insert or remove a SIM card for your Home Phone Base.
Don't attempt to insert or remove the SIM card while the device is powered on. Doing so may harm the SIM card and/or the device.
The Home Phone Base comes with the SIM card installed.
  1. Ensure the device is powered off.
  2. Remove the battery cover using a fingernail or similar tool.
    Remove the battery cover
  3. Do one of the following:
    • Insert SIM card
      Ensure the gold contacts are facing down, align the card (notch first) and gently push the card in until it clicks into place then release.
      Insert SIM
    • Remove SIM card
      Gently push in on the card, then carefully pull out the SIM card.
      Remove SIM
  4. Replace the battery cover.