Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Samsung Galaxy Note10 - Set Up Fingerprint Recognition

2026-10-22 19:08:44.732

Samsung Galaxy Note10 - Set Up Fingerprint Recognition

Here's how to setup fingerprint lock for your Galaxy Note10 / Note10+ / Note10+ 5G.
  • A fingerprint is utilized to unlock the device.
  • For the fingerprint scanner to operate, hands must be clean and free of moisture, dirt, oil, lotion, dyes, etc.
  • Up to 3 fingerprints can be registered on the device.
  1. From a Home screen, swipe up from the center of the display to access the apps screen.
    These instructions only apply to Standard mode and the default Home screen layout.
  2. Navigate:
    Settings Settings icon
    Biometrics and security
    .
  3. From the Biometrics section, tap
    Fingerprints
    .
  4. Enter the current PIN, password, or pattern.
    If no screen lock is active, tap
    Continue
     and select a lock option (e.g., Pattern, PIN or Password) then follow the steps to complete the process.
    Refer to Set Up Screen Lock for assistance.
  5. Follow the on-screen tutorial to scan your fingerprint. Repeat as necessary until the process is complete.
    Fingerprint Sensor
  6. Tap
    Done
     (lower-right).
  7. Tap the
    Fingerprint unlock switch
     to turn on Switch on or off Switch off.