Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Samsung Galaxy S10 5G - Touch Screen Settings

2026-10-22 21:03:21.923

Samsung Galaxy S10 5G - Touch Screen Settings

Here's how to adjust the touch screen sensitivity for your Galaxy S10 5G.
  • The Samsung Galaxy S10 5G features an Infinity O display that minimizes the bezel, so the proximity sensor is now located at the top of the display.
    • When the proximity sensor is in use, such as when you are in a call, it is possible to see a small light blinking or a flickering pixel near the top of the display.
    • Communication apps such as Hangouts and WhatsApp may also enable the proximity sensor, and cause the blinking light to appear.
  • You can increase touch sensitivity to compensate for the use of a screen protector by following the steps below.
  1. From a Home screen, swipe up or down from the center of the display to access the apps screen.
    These instructions only apply to Standard mode and the default Home screen layout.
  2. Navigate:
    Settings
     Settings icon >
    Display
    .
  3. Tap the
    Touch sensitivity switch
     to turn on Switch on icon or off Switch off icon.
    When on, sensitivity is increased.