Alcatel Avalon™ V - Add a Wi-Fi Network
Here's how to connect your Avalon V to a Wi-Fi network.
Connect to an Available Wi-Fi Network
- From a Home screen, swipe up from the center of the display to access the apps screen then navigate: .
- Ensure the Wi-Fi switch (upper-right) is turned on
.
- From the Wi-Fi networks section, tap the preferred network.If the preferred network is not listed, it can be added manually.
- If prompted, enter the appropriate password then tapCONNECT.To view the password as it is being entered, tapShow password(enabled when a checkmark is present).
Manually Connect to a Wi-Fi Network
Wi-Fi network info is required to complete several steps. Refer to the network admin for assistance.
- From a Home screen, swipe up from the center of the display to access the apps screen then navigate: .
- Ensure the Wi-Fi switch (upper-right) is turned on
.
- TapAdd network(located at the bottom).
- From the Network name (SSID) field, enter the appropriate name.
- From the Security field, tap theDropdown menu
.
- Tap the appropriate security option:If using an Open network (None), skip to step 8.
- None
- WEP
- WPA/WPA2 PSK
- 802.1x EAP
- From the Password field, enter the appropriate password.To view the password as it is being entered, tap (check)Show password.
- Ensure additional settings (e.g., EAP method, CA certificate, etc.) are configured appropriately (if applicable) then tapSAVE(lower-right).