Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

KYOCERA DuraForce PRO 2 - Add a Virtual Private Network

2026-10-22 21:18:02.399

KYOCERA DuraForce PRO 2 - Add a Virtual Private Network

Here's how to add a virtual private network (VPN) to your DuraForce PRO 2.
A virtual private network (VPN) encrypts your internet traffic and protects your online identity via a secured remote server and is most commonly used when remotely accessing company systems (e.g., company email, intranet sites, etc.).
  1. From a Home screen, navigate:
    Apps
     >
    Settings
     >
    Network & internet
    .
  2. Tap
    VPN
    .
  3. Tap the
    Add icon +
     (upper-right).
  4. If presented with a lock screen notification, tap
    SET LOCK
    .
    Refer to Set Up Screen Lock (Pattern, PIN or Password only) for assistance.
  5. From the 'Name' field, enter the appropriate name.
    Contact the VPN administrator for assistance with server info and credentials.
  6. From the 'Type' field, tap the
    Dropdown menu
     Drop down menu icon (right) then select the VPN type:
    • PPTP
    • L2TP/IPSec PSK
    • L2TP/IPSec RSA
    • IPSec Xauth PSK
    • IPSec Xauth RSA
    • IPSec Hybrid RSA
  7. Enter the required info into the applicable fields then tap
    SAVE (lower-right)
    .
    If applicable, tap
    Show advanced options
     to configure the following:
    The available options vary depending upon the selected VPN type.
    • DNS search domains
    • DNS servers
    • Forwarding routes
    • OCSP Web address