Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Verizon GizmoTablet ™ - Add a Wi-Fi Network

2026-10-22 16:06:25.918

Verizon GizmoTablet™ - Add a Wi-Fi Network

Here's how to connect your GizmoTablet to a Wi-Fi network.

Connect to an Available Wi-Fi Network

  1. From a Home screen, swipe up or down from the center of the display to access the apps screen.
  2. Navigate:
    Settings Settings icon
    Connections
    Wi-Fi
    .
  3. Ensure the Wi-Fi switch (upper-right) is turned on Switch on .
  4. Tap the preferred network.
    If the preferred network is not listed, it can be
    added manually
    .
  5. If presented, enter the appropriate password then tap
    Connect
    .
    To view the password as it is being entered, tap (check)
    Show password
    .

Manually Connect to a Wi-Fi Network

Wi-Fi network info is required to complete several steps. Refer to the network admin for assistance.
  1. From a Home screen, swipe up or down from the center of the display to access the apps screen.
  2. Navigate:
    Settings Settings icon
    Connections
    Wi-Fi
    .
  3. Ensure the Wi-Fi switch (upper-right) is turned on Switch on .
  4. Tap
    Add network
     (at the bottom of list).
  5. From the Network name field, enter the appropriate name.
  6. From the Security field, tap the
    Dropdown menu icon
     .
  7. Tap the appropriate security option:
    If using an Open network (None), skip to step 9.
    • None
    • WEP
    • WPA / WPA2 / FT PSK
    • 802.1x EAP
  8. From the Password field, enter the appropriate password.
    To view the password as it is being entered, tap (check)
    Show password
    .
  9. Ensure additional settings (e.g., EAP method, CA certificate, etc.) are configured appropriately (if applicable) then tap
    Save
     (lower-right).