Samsung Galaxy S7 / S7 edge - Set Up Fingerprint Recognition
Here's how to add fingerprint recognition to unlock your Galaxy S7 / S7 edge.
- A fingerprint is utilized to unlock the device.
- For the fingerprint scanner to operate, hands must be clean and free of moisture, dirt, oil, lotion, dyes, etc.
- Up to four fingerprints can be registered on the device.
- From a Home screen, swipe up or down from the center of the display to access the apps screen.These instructions only apply to Standard mode and the default Home screen layout.
- Navigate: .
- From the Biometrics section, tapFingerprint Scanner.If presented, enter the current PIN, password, or pattern.
- If presented, tapCONTINUEand select a lock screen option (e.g., Pattern, PIN, Password) then follow the steps to complete the process.If necessary, refer to Set Up Screen Lock for assistance.
- Place your finger on the fingerprint sensor (Home key) until it vibrates then lift.View the on-screen tutorial for assistance.Repeat this step as necessary until the process is complete.For greater accuracy, finger placement should vary slightly each time.
- TapDONE(lower-right).
- If presented, tap theNotifications switch(upper-right) to turn on
or off
then tap
DONE.When on, configure any of the following:- Hide contentTap to turn on or off.
- Notification icons onlyTap to turn on or off.
- TransparencySlide theblue barleft or right to adjust the level while viewing the preview at the top.
- Auto-reverse text colorTap to turn on or off.Reverses the color of notification text based upon background color.
- If presented, tapTURN ON(lower-right).