Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Verizon Jetpack 4G LTE Mobile Hotspot MiFi 5510L - Insert / Remove SIM Card

2026-10-22 19:10:55.277

Verizon Jetpack 4G LTE Mobile Hotspot MiFi 5510L - Insert / Remove SIM Card

Here's how to properly insert or remove a SIM card for your Verizon Jetpack - MiFi 5510L.
Instructions on inserting/removing your SIM can help with activation issues/errors and connectivity issues.
Don't attempt to insert/remove the SIM card while your Verizon Jetpack® 4G LTE Mobile Hotspot MiFi® 5510L is powered on. Doing so can harm the SIM card and/or the device.
  1. Ensure the device is powered off.
  2. Remove the battery cover.
    Utilizing the provided slot, carefully lift then detach the cover.
    Remove battery cover
  3. Utilizing the notch, lift then remove the battery.
    Remove battery
  4. Lift the SIM card hinge.
    Lift SIM card hinge
  5. Do one of the following:
    • Insert SIM card
      With the gold contacts facing down and the notch located in the upper-left, insert the SIM card as shown.
      Insert SIM card
    • Remove SIM card
      If the SIM does not slide out easily, continue to hold the SIM hinge and push the SIM card from the top to dislodge.
      Remove SIM card
  6. Replace the SIM card hinge.
    Press down on the hinge to lock it into place.
  7. Insert the battery.
    Ensure that the connectors on the battery align with the connectors on the device.
  8. Replace the battery cover.