Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Software Upgrade Assistant (Kyocera) - Enable / Disable Auto Updates

2026-10-22 18:10:46.091

Software Upgrade Assistant (Kyocera) - Enable / Disable Auto Updates

Here's how to enable / disable automatic updates for the Software Upgrade Assistant for your Kyocera device.
This helps you update the software on your Kyocera device using your computer / PC.
The Software Upgrade Assistant (SUA) can be configured to automatically prompt for software updates. The most recent software version becomes available on the SUA / SRA tool within a week of a new software update.
  1. Ensure the wireless device is powered on, unlocked (if device lock is enabled), and connected to a compatible computer using the supplied USB cable.
  2. Ensure the Software Upgrade Assistant software is installed. Refer to Initial Setup - Software Upgrade Assistant for assistance.
  3. From the task bar (located in the lower-right), right-click the
    Software Upgrade Assistant tray icon
     Kyocera SUA icon (when the SUA does not launch automatically).
  4. Click
    Options
     then click one of the following to enable or disable.
    Enabled when a checkmark is present.
    • Enable Auto Check for Upgrades
    • Disable Auto Check for Upgrades